cooling ducts for BMG/Left SV01/03 upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Complete part cooling and heatbreak cooling solution for a BMG/Left upgrade of SV01 or SV03 (Sovol). Total weight of…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 350
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Complete part cooling and heatbreak cooling solution for a BMG/Left upgrade of SV01 or SV03 (Sovol). Total weight of the printed parts is 30 grams or less.
All fans are 4020: two blowers and one axial.
These are an adaptation for the BMG extruder of the following original designs for part cooling fan ducts:
- https://www.printables.com/model/158922-the-no-strings-part-cooling-fan-duct-for-sovol-sv0
- https://www.printables.com/model/158915-2nd-part-cooling-fan-for-sv01-by-sovol-3d-rev5
Rev b has beefier vent holes.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
15-100%
Filament: any PETG any
Notes:
Print in the orientation shown in the screenshots. Supports are built-in where needed, no additional supports are necessary.
Category: 3D Printer Accessories