8BitDo Lite 2 Controller Case
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.92 – €1.12 net (excluding VAT)
For file: Buttons_0.15mm_PLA_MK3S_1h12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.02 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 1.2 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Magnetic carrying case for 4x 8BitDo Lite 2 controllers, including space for their charging cables
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 114
- Makes
- 1
- Views
- 2,206
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Share Alike
This case was made to fit 4 of 8BitDo's Lite 2 controllers together with their charging cables.
The dimensions of this case are: 19.3 x 10.5 x 7.4 cm (L x W x H)
All parts of this model are single color prints which are glued together.
I suggest printing them with a .6 mm nozzle at .3 mm layer height for most of the part, but a slightly lower layer height at the bottom of the part to get a nicer fillet.
There is a spot for 8x 5x5mm round magnets in both the bottom and top inside parts, which makes 16 magnets in total. These have to be inserted during printing to make them invisible.
I stacked 2 magnets on top of each other for every hole to make them stronger so that the lid stays on the case reliably.