Thermaltake Core P3 360mm Radiator/Fan Mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.05 – €3.73 net (excluding VAT)
For file: 360 AIO Bracket and Joint_0.3mm_PLA_MK3S_2h47m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.39 excluding VAT (range midpoint).
- Weight reported by the author
- 54 g
- Print time reported by the author
- 2.84 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
360mm radiator or fan mount for the Core P3
- Rating
- 4.5 / 5
- Likes
- 31
- Downloads
- 685
- Makes
- 3
- Views
- 4,111
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
A mount that can hold 360 to 120mm radiators or fans. I needed a mount that could support a 240mm radiator for my GPU and could only find models for 360mm.
For 360mm radiators just screw in place and then slide onto the poles of the case.
For anything BUT a 360mm radiator you will need to glue the two halves together using the supplied “Joint” file. See last photo for joint location. Final result is very sturdy.
Gaps between the mount and the sides of the radiator or fans for cable runs.
Mounting rail holes with room to slide radiators or fans to the best position for your build.
Printed in PLA at .30 with 20% infill.
EDIT: Added models that are 16mm longer for the Core P3 TG Pro. You will need to drill your own holes for the radiator screws though.