Thermaltake Core P3 360mm Radiator/Fan Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
360mm radiator or fan mount for the Core P3
- Ocena
- 4,5 / 5
- Polubienia
- 31
- Pobrania
- 684
- Wydruki
- 3
- Wyświetlenia
- 4108
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
A mount that can hold 360 to 120mm radiators or fans. I needed a mount that could support a 240mm radiator for my GPU and could only find models for 360mm.
For 360mm radiators just screw in place and then slide onto the poles of the case.
For anything BUT a 360mm radiator you will need to glue the two halves together using the supplied “Joint” file. See last photo for joint location. Final result is very sturdy.
Gaps between the mount and the sides of the radiator or fans for cable runs.
Mounting rail holes with room to slide radiators or fans to the best position for your build.
Printed in PLA at .30 with 20% infill.
EDIT: Added models that are 16mm longer for the Core P3 TG Pro. You will need to drill your own holes for the radiator screws though.