Stanley sorting box inlays
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.64 – €0.78 net (excluding VAT)
For file: 38x48x30-Full_0.3mm_PLA_MK3S_37m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.71 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 36.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Stanley sorting box inlays for small parts in different sizes
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 54
- Makes
- 0
- Views
- 667
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Stanley sorting box inlays for small parts in different sizes.
I use a lot of these Stanley sorting boxes. For most parts they work quiet good and their dividers often work well, but not for small and thin parts, like washers… They always create a mess inside the divided trays and move to other sections of a split tray…
Therefore i made these small inlays to keep such small parts together in 1 section.
The inlays have also a little grip to be able to pull them out of the tray and to be able to place a max. 12x30mm Brother P-Touch lable on them to name the contained parts better.
As shown in the picture there are several different sizes available, because the Stanley trays have dfferent sizes inside as well:
- All inlays are available in a half width spit version as well for really small parts
- 33x108x51-Full
- 33x108x51-Half
- 26x108x51-Full
- 26x108x51-Half
- 38x48x30-Full
- 38x48x30-Half
- 46x48x30-Full
- 46x48x30-Half
- 38x48x30-Quarter
- 46x48x30-Quarter
- 26x108x51-Third
- 33x108x51-Third
All walls are 1.2mm so that the inlays should be able to be strong enough even for heavier parts. This also allows to print faster with the 0.3 draft profile.
Printing instructions:
- 0.3 draft profile
- No supports needed
- No brim needed
Happy printing :)