Euro Outlet Cover for Aqara Button
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mounting bracket for Aqara Button designed to be mounted over a standard 60mm Euro outlet can.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 91
- Makes
- 2
- Views
- 762
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Share Alike
I needed to replace a standard European switch with an Aqara smart button. To cover the standard 60mm hole in the wall and mount the Aqara button, I created a two part solution. The base plate is 80mm square with screws 58 mm apart, for mounting to a standard European round electrical can/jack. The cover is a pressure fit with a cutout for the Aqara button.
I printed with 0.6mm Nozzle on a MK3S with 0.3mm layer height and got a good press fit for the cover and base plate. The Aqara slot was a little two tight in the corners. I'll need to adjust the radius before trying to print again, but it took a couple of minutes of sanding just the corners to get a good press fit for the Aqara button in the cover.