1 / 1
Stand for RFIDeas RDR-805H1AKU Snap-In Box — image 1

Stand for RFIDeas RDR-805H1AKU Snap-In Box

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is one of those hyper-specific projects that I can't see anyone having a use for besides me, but if you need it,…

Rating
0 / 5
Likes
0
Downloads
9
Makes
0
Views
140
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is one of those hyper-specific projects that I can't see anyone having a use for besides me, but if you need it, there's no substitute. So here it is: A blank version of a stand for this card reader mounting box [https://www.thingiverse.com/thing:4564723]. As you can see in the sample image, I knocked my employer's logo out of the left side, but you could as easily stick a business card or small plate to it. The mounting box for the card reader is friction fit, though it could be glued.

Because of the structure of the logo, I ended up printing this one facedown with supports enabled. If I were doing it again I would try to arrange it so that I can print it on the left or right side, and I might be able to get away with less support material.

Print Settings

Printer Brand:

Ultimaker

Printer:

Ultimaker 3

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

.15 mm

Infill:

20% (gyroid)

Filament: Ultimaker Tough PLA Red


Notes:

The downward-facing angle of the cylinder was a bit rough. Next time I'll try to print it standing on the side to avoid supporting this angle.

Post-Printing =============

Mounting box fit is tight. Be patient. :)

Category: Other

Tags