M-Lok AFG Angled Foregrip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Angled Foregrip (AFG) to fit M-Lok Slots
- Rating
- 5 / 5
- Likes
- 144
- Downloads
- 1,056
- Makes
- 12
- Views
- 4,342
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of Shqype MLOK AFG With Correct Holes and Guide Tabs
I have also uploaded a Keymod AFG.
Although you can use this for non-standard or not-AR-15 handguards, I have uploaded a V2 AFG, which is an improved version of this one.
I made the lugs solid, as I've had the outline-style lugs shear off.
I used the Braudel T-Nut and Screw set. They are metric, not real M-Lok spec hardware, but significantly cheaper than the real thing and they work the same.
My Odysee page - https://odysee.com/$/invite/@Suburban:1
Print Settings
Printer brand:
Creality
Printer:
Ender 3
Supports:
Yes
Resolution:
0.2-0.24mm
Infill:
60%
Filament brand:
Overture
Filament color:
Black
Filament material:
PETG
Notes:
0.2 to 0.24mm layers
100% fan for bridging, 0% fan for everything else (PETG). If you have a really good cooling duct, you can maybe use less than 100% for bridging.
Use supports everywhere
60% or greater infill
Walls, top, and bottom should be 2.4mm or greater, as appopriate for your line width and layer height.