50 models
Hello there, Full credit to user Rusty__Shackleford for this great model "Angled fore grip mlok AFG M-LOK" I just remixed it by cutting side mount which didn't really worked for me, also took me too much time thinking about good angle for…
Remix of Shqype MLOK AFG With Correct Holes and Guide Tabs This is an upgrade over my M-Lok AFG Angled Foregrip. There are "wings" that wrap up around the handguard. It should fit most slim AR-15 octagonal handguards with flats that…
Print this with supports to the build plate only to handle bridging on the underside of the p-rail attachment area. PETG or PLA+ recommended for durability and heat resistance. Affixing AFG to Picatinny Rail: Vertically, you can affix…
Remix of Shqype MLOK AFG With Correct Holes and Guide Tabs I have also uploaded a Keymod AFG . Although you can use this for non-standard or not-AR-15 handguards, I have uploaded a V2 AFG , which is an improved version of this one. I made…
The source marked this model as adult content.
AFG designed for mounting on M-Lok rails. I have one model with locating tabs and one without for bed adhesion/support reasons. Attach to your M-Lok rail with two 8-32 x .5" button head cap screws and hex/square nuts. The screw length is…
Remix of Toxic Sandbox Keymod angled foregrip. https://www.thingiverse.com/thing:2889845 I have also uploaded an M-Lok AFG. You can find the M-Lok AFG here - https://www.printables.com/model/304426-m-lok-afg-angled-foregrip Added lugs to…
Remix of the FFFTechnology “Get Bent Stubby AFG” modeled to fit the Mac N Cheese. What's changed: Attachment area was made smaller to only cover the three 1913 slots on the Mac N Cheese front receiver without bottoming out against the…
Picatinny mountad, holds spare magazine for the Venom Pro nicely. Print upside down no suaports needed.
The all black AFG in the cover photo is this model, compared with the model linked below partially painted in the back. It was almost what I wanted, but I had a few tweaks I wanted to make.…
Get that St. Valentines Day vib…. Filament PLA+ or better Layer Height .16mm Walls 5+ Infill 25%+ Print the AFG upside down with supports. Use support blockers as the inside of the foregrip is semi-hollow. Non-Printed Hardware Needed: 3x…
I removed the front part of the hand stop. Remix of existing model.
This 3D model represents a United States Army infantry soldier deployed during the Afghanistan War , wearing a combat uniform and equipment typical of the late 2000s–early 2010s period. The model is designed for display, collection, and…
A streamlined remix of a classic M-Lok Angled Foregrip! I modified the original design so it prints entirely without supports and added a stylized cutout for a sleeker look. Hardware Requirements: 2x 8-32 x 0.5" button head cap screws 2x…
I modified the original model, in order to make it shorter and cut out a slot so that it would fit a M-Lok handguard with only one M-Lok slot. I also changed the front M-Lok locator tabs to something more-closely resembling the official…
Quick remix of EszOzwierz's great AFG remix, added a groove on rear to allow easier access to screw hole.
A remix of @shoelesshistorian's updated Swoopy Picatinny AFG, with closer bolt spacing so that it works with rails with only 3 or 4 grooves. Specifically based on the stubby/small version of the original.
This lovely AFG with tightened tolerances for a tighter fit on the lynx priming block.
A tighter fit on the rail, reduced pretty much all of the side to side wobble Category: Hobby
I took Captain Slug's AFG and turned it into a riser because I thought it'd be funny. It ended up looking kinda good, so I made some changes and thought I'd share.
Hello everyone! This is a remixed version of Captain Slug's Picatinny Angled Foregrip that doesn't require any additional hardware to use. I like the no hardware system I developed for my Torrent Inspired Angled Foregrip , so I figured it…
This is a vertical foregrip (VFG) and angled foregrip (AFG) for specific use on the new Gecko 2.0 Gonzo Grip System platform. These hand grips have been extensively improved in the following areas: Split handle design for much better…
Small AFG for Keymod rail, Odinworks inspired. Small but comfortable for a good hand angle if using a thumb over bore grip. I could only get it on with just the rear pin in place with the keymod screws i had which seemed short. It is…
A spiritual successor to the Magpul AFG 2, the 20 degree grip as well as the front and rear hooked ends take inspiration from their original design. As a big fan of the original, I've always wanted to improve on two specific things -…
I have started building world maps, country by country and state by state. appreciate me in this regard.
Love how this Riser looks. Originally posted by Toukejin. Original post: https://www.printables.com/model/219703-afg-picatinny-rail-riser I really like the looks of it without the core in the middle. Noticed there were 2 holes at the end.…
Mk4 stans rise up! No longer are we constrained to choosing between awkwardness supreme or psuedo-fitment in our choice of foregrip, for today the Mk-4-grip is here to set you free! It's an AFG custom fitted to utilize all the built-in…
Afghan Hound Low Poly Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d )
There is quite literally a pantheon of filament guides to choose from out there, so why did I create another? That is a fantastic question. So what do I think makes this one different? Well... It's intended to work with the OEM spool…
retains on rail better, maybe
LeafGuide is a simple clip designed to move fan leaves out of the way—without cutting or damaging the plant. Instead of relying on heavy defoliation, LeafGuide redirects leaves outward to expose bud sites and improve light penetration in…
Had ik eens ergens gezien om zo de inhoud van bepaalde voeding te spoelen. Una vez vi en alguna parte que podía enjuagar el contenido de ciertos alimentos de esta manera. J'ai vu quelque part qu'on pouvait rincer le contenu de certains…
Simple Afghanistan fridge magnet that uses a 3mm x 8mm magnet. Tolerence is .1mm on width and .2 on the height. Tolerence fits perfect for press fitting on my P1s **I realized i had designed them mirrored in the pics, the model is updated…
This is a 3D printable Afghan Hound keyring design — perfect for dog lovers, Afghan Hound owners, and 3D printing fans. 💾 DOWNLOAD THE STL HERE: https://uniquepersonalisedgifts.com/products/afghan-hound-keyring-stl-file ✔ Easy to print ✔…
This print is well designed and fitted for the Afgaphoto Realimove AC7000 action camera, the case includes cutouts for charging, the wifi button, the top buttons and the back screen!
If you want to make money, visit my Patreon where you can buy commercial license and find more models! https://www.patreon.com/c/Decome How to add your dog's name Open the file Delete all “text_shape” Add the name of your dog. Remember to…
This model is a replacement power button for Tektronix AFG3000 series function generators. The original button has some very thin plastic elements that can snap, resulting in the button dislocating from the power switch and rendering the…
Added a leafguard mesh of 20 X 20mm. It is integrated so it can't be removed. The version in the picture is Fiberlogy Easy PETG printed on an Prusa Mini+
Recreation of the plastic mounting hardware for the door of the Whirlpool AFG 8072 Freezer. There are files both with and without custom supports. I testprinted it out of both PLA and PETG. I mounted the PLA one. 0.2 mm layer height. For…
LeafGlider 🍃✈ The perfect fusion of nature and speed! This model takes inspiration from leaves, envisioning a future of green transportation where technology and nature dance together! 🌍✨…
🌱 Where the Kanto adventure begins Recreate one of the most memorable locations from the Kanto region with this 3D printable Pallet Town protagonist’s house by Present United 3D . Modelled after its appearance in Pokémon FireRed and…
A remix of @shoelesshistorian's updated Swoopy Picatinny AFG, with closer bolt spacing so that it works with rails with only 3 or 4 grooves. Specifically based on the stubby/small version of the original.
This 3D model represents a United States Army infantry soldier deployed during the Afghanistan War , wearing a combat uniform and equipment typical of the late 2000s–early 2010s period. The model is designed for display, collection, and…
LeafGuide is a simple clip designed to move fan leaves out of the way—without cutting or damaging the plant. Instead of relying on heavy defoliation, LeafGuide redirects leaves outward to expose bud sites and improve light penetration in…
A streamlined remix of a classic M-Lok Angled Foregrip! I modified the original design so it prints entirely without supports and added a stylized cutout for a sleeker look. Hardware Requirements: 2x 8-32 x 0.5" button head cap screws 2x…
TopoTokens – Afghanistan. An 85 mm collector coin showing the real 3D topography of Afghanistan, raised as relief. The country name is embossed on the curved rim (AFGHANISTAN) with a fine ribbed edge like a real coin. 8 colour versions…
