Raspberry PI 4B case with active cooling
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€5.05 – €6.17 net (excluding VAT)
For file: Raspberry PI 4B case_0.15mm_PETG_MK3S_6h29m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.61 excluding VAT (range midpoint).
- Weight reported by the author
- 56 g
- Print time reported by the author
- 6.47 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Raspberry PI 4B case with active cooling for maximum efficiency
- Rating
- 4 / 5
- Likes
- 10
- Downloads
- 160
- Makes
- 1
- Views
- 794
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You'll only need 4 M2.5x5 screws to attach the raspberry pi to the cover.
The fan is 40x40x10mm ideally with a USB.
CPU stays very Cool. 35C during 100% CPU usage.
To join the top and bottom of the cover, use 3 M3x25 screws ISO 7991.
You can also check website https://www.3d-eagle-engineering.com/