1 / 4
Spice Rack Pullout - Print your own size
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fully parametric remix of Spongybob's Spice Rack Pullout.
- Rating
- 5 / 5
- Likes
- 158
- Downloads
- 538
- Makes
- 7
- Views
- 4,226
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
With this fully parametric remix you can customize the dimensions of SpongyBob's original Spice Rack Pullout design. Want to use wider spice containers? Need a taller version of the top shelf? No problem at all, just follow the instructions below:
- Download and install Blender (It's free!) - If you already have it installed make sure you are on at least Version 4.1.0.
- In Blender, open up the Preferences menu, go to Add-ons, and search for and enable the 3D-Print Toolbox Add-on (we need this to export the STL-Files for printing).
- Download the attached .blend-File and open it in Blender. In the top right you can enter your desired dimensions (see the attached screen shot). If you can't see the dimensions make sure Main_Size is selected in the bottom right.
- Select the objects named “spice-*” one after the other and click the Export-Button (see screen shot). If there is no Export-Button hit “N” on the keyboard and/or make sure 3D-Print is selected. If there is no 3D-Print Tab make sure the 3D-Print-Toolbox Add-on is enabled (see Step 2).
- Open the exported STL-Files in your preferred Slicer (they are in the same folder as the .blend-File). All models can be printed without supports, spice-top-rail needs to be flipped over though.
A couple tips for the dimensions/settings:
- Shelf Width: Measure the diameter of your shelf containers and add about 7mm (leaves a mm of space left and right of the container, depending on Wall Thickness).
- Shelf Depth: Multiply the container diameter with the desired amount of containers and add at least 7mm (more is better, so you can comfortably remove the outermost containers).
- Shelf Height: Measure the height of your shelf containers and add at least 25mm, more helps with easy removal.
- Diameters: Enter the exact respective diameter, a bit of wiggle room will be automatically added.
- Shelf Count: Enter as many as you want and as your build plate allows :)
- Wall Thickness: Best to leave that alone, except for maybe extremely wide shelves.
- Cap Design Version: Enter “1” for SpongyBob's original design or “2” for my variant that is a bit more in line with the shelves.
- Screwholes: Whether or not the bottom rail has screw holes. If you intend to use double sided tape (like I did) you can untick this box.