1 / 3
Stepladder foot replacement 20x33mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A basic stepladder foot replacement
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 105
- Makes
- 0
- Views
- 326
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement feet for small stepladders with a frame of 20.40 mm x 33.40mm and a ground angle of 22°.
Print instructions
- Best printed in non-brittle plastics. PETG is what I used.
- Printed standing up with a snug support.
- 0.20mm layer height
- 2 perimeters
- 15% gyroid infill
- Supports: 25° overhang and snug.
Support
If you like my effort, give this design a like and share makes!