Zigbee plant sensor for B-Parasite
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small casing for the B-Parasite open hardware plant sensor.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 42
- Makes
- 0
- Views
- 1,422
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v3.0
This small case is designed for the open source hardware B-Parasite. I made some firmware that allows it to work via zigbee. Check it out on my Github page.
For assembly you need three treaded inserts with an outer diameter of 4mm and an inner diameter for 3mm bolts. Simply slide the mount part (see stl files) from the bottom up until the screw holes aline. Use 2x 3mm bolts to mount it in place. Now, you can slide the cover over the top and secure it with another 3mm bolt.
It is not yet fully optimized for the internal light, temperature and humidity sensor.