Ring 'Stick-Up' Camera Mount
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.09 – €1.33 net (excluding VAT)
For file: RingStUp_10Offset_0.15mm_PETG_MK3S_1h24m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.21 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 1.4 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A Ring Camera view-angle-modification mount (10Deg off-set for Ring Stick-Up)
- Rating
- 0 / 5
- Likes
- 36
- Downloads
- 372
- Makes
- 0
- Views
- 2,564
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
This is a simple mount that provides a 10 degree down and 10 degree lateral off-set for a Ring Stick-Up Cam. The standard Ring mount allows limited direction adjustment via a ball joint. This mount compensates for this. It is useful if you want to look down a wall or along a wall.
The mount has two sets of mount holes, allowing a 'left' or 'right' set up. The thickness of the mount allows the originally provided (ring) screws to still be used.
For external use, so made from PETG.
There is a strengthening internal buttress support, but I suspect it isn't necessary in reality.