1 / 7
🔁 Multiple modern twisted cabinet/drawer handles.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.67 – €0.82 net (excluding VAT)
For file: modern-stands-2x_0.2mm_PLA_MK3S_55m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.75 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 54.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Twisted cabiner/drawer handle in a modern style with M4 thread for attaching to furniture.
- Rating
- 4.75 / 5
- Likes
- 106
- Downloads
- 440
- Makes
- 4
- Views
- 1,532
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Info:
- cabinet / drawer handle
- M4 threads on the bottom of each stand for attaching to furniture
- choose from multiple styles
Print instructions:
- see 3mf
- 0.2 mm layers in general
- no supports
- handle:
- print handle standing, use a lot of brim (like 12mm)
- there is slight overhang between the heights 9.3-11.1mm, descrease layer height there, so it is printed nicely (down to 0.08mm)
- increase infill at the ends, if your drawer is heavy
- if you want different size (length between the holes in the furniture is diferent), you can easily scale Z Axis (the hole in a stand is more deep, so the handle will still fit in there)
- given handle size is for the length of 12.8cm between bolt holes
- so if you want handle for 14cm distance between holes, increase handle size by 1.2cm
Assembly:
- insert handle to the stands (use a drop of glue or adhesive tape for inside connector, if it is too loose)
- Use M4 bolt for attaching handle with stands to the drawer/cabinet