Railcore II 300 ZL Electronics Box Corner Wago and Heatserts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the https://www.thingiverse.com/thing:3542340 modified for heatset inserts. It's for WAGO 222s (old style). If…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 231
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This is the https://www.thingiverse.com/thing:3542340 modified for heatset inserts. It's for WAGO 222s (old style). If you have the new style WAGOs (221s) print this one: https://www.thingiverse.com/thing:3914814
Initeq (Amazon) inserts will work fine, available here https://www.amazon.com/initeq-M3-0-5-Threaded-Inserts-Printing/dp/B077CJV3Z9
Print Settings
Printer:
Formbot Raptor 2
Rafts:
No
Supports:
Yes
Resolution:
0.2 layer height, 0.4 nozzle
Infill:
20%
Filament:
Atomic PETG
Notes:
Set up a support extruder since PETG supports are a bear. This is done with the same extruder you are using for the model, not a physical second extruder. (Of course, if you have a dual extruder printer, that's fine, but this is done with a single extruder). If you're using S3D, use the fff profile I have included here. I'm using a Forbot Raptor 2 for this, but it will be a good starting point for your printer.
Category: 3D Printer Parts