Cooling Fan mount for East3D Gecko Stepper Drivers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The idea is to make minimum changes to the machine but still takes the overall experience a step further.I think the…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 162
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
The idea is to make minimum changes to the machine but still takes the overall experience a step further.I think the majority of the noise is coming from the fan grill. Basically, I just repositioned the original cooling fan, and 40mm is quite commonly available if you desire to use a quieter fan.
On top of existing screws and nuts, you still need,
M3 T nuts - 2
M3x14mm screws - 2
M3x8mm screws - 2
M3 washer (optional) - 2
rubber/silicone rings to soft mount the fan (optional) - 2
Also, you might want to join us at East3D Gecko facebook group.
Category: 3D Printer Accessories