rockshox_judy_silver_tk_solo_air_27.5+_120_travel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
first off, after watching the design on this: https://www.thingiverse.com/thing:4309078 fucking awesome work man, and…
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 118
- Makes
- 0
- Views
- 1,010
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
first off, after watching the design on this: https://www.thingiverse.com/thing:4309078 fucking awesome work man, and I give you MAD PROPs for doing this customizable. I know you said you spent like a day just doing the fork crown fit, and you are not wrong, what a PITA! I appreciate that you want this to be customizable, but you are running a RockShox Pike 29+ and im running a RockShox Judy 27.5+ and still, the crown is so different. If you pull it off, good for you. But, instead of waiting, I used your design as inspiration and just molded my own from scratch. Better/worse, IDK, but it works. And I like the look look of it (ill post some pics after I re print in PETG and add a finish coat). anyway, im rocking a 2019 Trek Roscoe 27.5+ with Rockshox Judy silver TK solo air Boost spacing, 120mm travel, and the crown and geometry is molded to fit that.
I seperated the guard into a front and back, and glued them together after completion, the zip ties should help it stay together. I also split out the crown part if you want to print just that and see how it fits on your fork, its not perfect, but it holds nice and tight when riding.
enjoy!
UPDATE: added a second version (un split so you'll have to do that part yourself). this one is has the sweep rotated towards the rear more so the fender goes a little more down the tire, and I reduced the chamfers too, for more coverage. https://imgur.com/gallery/ozaIZE0
Print Settings
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
10%
Filament: Overture PETG Space Gray
Notes:
I printed mine using Prusa Slicer, 2 walls, but the outer wall is at .62 thick, I also turned off the infill right after the zip tie holes, finished at about 52g.
Category: Sport & Outdoors