1 / 9
rockshox_judy_silver_tk_solo_air_27.5+_120_travel — zdjęcie 1
1 / 9

rockshox_judy_silver_tk_solo_air_27.5+_120_travel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

first off, after watching the design on this: https://www.thingiverse.com/thing:4309078 fucking awesome work man, and…

Ocena
0 / 5
Polubienia
22
Pobrania
117
Wydruki
0
Wyświetlenia
1004
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

first off, after watching the design on this: https://www.thingiverse.com/thing:4309078 fucking awesome work man, and I give you MAD PROPs for doing this customizable. I know you said you spent like a day just doing the fork crown fit, and you are not wrong, what a PITA! I appreciate that you want this to be customizable, but you are running a RockShox Pike 29+ and im running a RockShox Judy 27.5+ and still, the crown is so different. If you pull it off, good for you. But, instead of waiting, I used your design as inspiration and just molded my own from scratch. Better/worse, IDK, but it works. And I like the look look of it (ill post some pics after I re print in PETG and add a finish coat). anyway, im rocking a 2019 Trek Roscoe 27.5+ with Rockshox Judy silver TK solo air Boost spacing, 120mm travel, and the crown and geometry is molded to fit that.

I seperated the guard into a front and back, and glued them together after completion, the zip ties should help it stay together. I also split out the crown part if you want to print just that and see how it fits on your fork, its not perfect, but it holds nice and tight when riding.

enjoy!

UPDATE: added a second version (un split so you'll have to do that part yourself). this one is has the sweep rotated towards the rear more so the fender goes a little more down the tire, and I reduced the chamfers too, for more coverage. https://imgur.com/gallery/ozaIZE0

Print Settings

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

10%

Filament: Overture PETG Space Gray


Notes:

I printed mine using Prusa Slicer, 2 walls, but the outer wall is at .62 thick, I also turned off the infill right after the zip tie holes, finished at about 52g.

Category: Sport & Outdoors

Tagi