1 / 4
SW2 BIQU H2 V2S REVO Carriage Mount and fan duct 5015 and Bl-Touch 3.1 — image 1
1 / 4

SW2 BIQU H2 V2S REVO Carriage Mount and fan duct 5015 and Bl-Touch 3.1

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Carriage Mount for BIQU HE V2S REVO on Sidewinder X2

Rating
4 / 5
Likes
18
Downloads
167
Makes
2
Views
1,681
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

You will find the whole project to be able to mount the BIQU H2 V2S REVO on an X2 artillery.
The assembly allows to put a BL_Touch (either a TOUCH_MI, or a BL touch)

The assembly is planned for a 5015 blower.

For the attachment on the cover, you will need a rubber band of the same thickness as the original one.

Printed in PETG in 0.16mm.

If BlTouch you need a
M851 X0.0000 Y25.0000

 

Update 11/04/2022

  • New FanDuct and cover
  • New 3D rendering

Update 11/06/2022

  • Modification FanDuct

Update 11/12/2022

  • New FanDuct V3 (The previous fan duct did not ventilate well in the area, the air was scattered all over the place.)
  • Update Cover (Reduction of the height of the cover so that the lighting is wider.
  • Added a part to support BLtouch (antclabs 3.1 or equivalent)
  • Increased sliding height for BLtouch (the TouchMi being by default lower than a BLtouch)

Update 12/11/2022

  • changing the positioning height of the fan duct. It was too high in relation to the nozzle.
  • Modification of support for BlTouch (type antclabs V3.1) Added stability.
  • Provision of Bltouch position information relative to the nozzle.

Update 02/12/2023


Complete redesign of the template. After testing the model for 3 weeks, I had to revise it

  • Changed the height of the carriage, because the Vslot Wheel was touching the parts when printing and was taking them off.
  • Modification of the insertion of the motor, more simple just by sliding it
  • Changed the position of the PCB connectors to wire more easily
  • Moved the Bl-touch to the rear in a fixed position for better stabilization.
  • Enlargement of the cover.
  • Simplification and reinforcement of the model (the reinforcement is due to the fact that the carriage broke after 3 weeks, and that I had the Z zero that changed as I used it)
  • Modified the height of the FanDuct and cleared the front air exhaust of the extruder.

Currently the model does not support the Mi-touch (I will see later to position it correctly)
In the future the model should support the BIQU MicroProbe V1.0 (if possible at the same level as the Bl-touch)

Update 26/02/2023

  • turning the bltouch upside down so that the heat is not directly on the PCB
  • Change blower position so that the air flow is centered at the outlet. 
  • Lowering the Fanduct to 2mm above the nozzle.

Update 03/06/2023

  • Change bl touch position. it's at x 0 and Y 25.
  • More compact model
  • Revised hood.
  • Refocused air flow
  • Revised Fan Duct to better dissipate air around the part.

List of parts needed for the 3D model:

  • Insert with Head, M3X4.8 (4 units, 2 for the fanduct, 2 for the Bltouch)
     

 

https://youtube.com/shorts/Sw0sLYyQCtw

Tags