The Simplest Filament Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The easiest to print filament clip
- Rating
- 2 / 5
- Likes
- 18
- Downloads
- 168
- Makes
- 3
- Views
- 410
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
My quest for the simplest and fastest printing filament clip has borne fruit!
This filament clip will fit a wide range of spool sizes and not kink your filament
For the fastest print, use vase mode and set your extrusion width to 0.89mm. With those settings, the prints take about 3 minutes to complete. This has been tested with 0.4mm (yellow PLA) and 0.6mm nozzle diameters (grey PETG)
To print multiples at the same time, use sequential mode
Make sure that you have clearance between the clips to make sure that your hot end doesn't knock off the previous clips when printing the next clip. I recommend 9 models spaced across the build plate, like so:
I'm sure you'll all enjoy this. Please let me know how you like it.