The Simplest Filament Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The easiest to print filament clip
- Ocena
- 2 / 5
- Polubienia
- 18
- Pobrania
- 167
- Wydruki
- 3
- Wyświetlenia
- 407
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
My quest for the simplest and fastest printing filament clip has borne fruit!
This filament clip will fit a wide range of spool sizes and not kink your filament
For the fastest print, use vase mode and set your extrusion width to 0.89mm. With those settings, the prints take about 3 minutes to complete. This has been tested with 0.4mm (yellow PLA) and 0.6mm nozzle diameters (grey PETG)
To print multiples at the same time, use sequential mode
Make sure that you have clearance between the clips to make sure that your hot end doesn't knock off the previous clips when printing the next clip. I recommend 9 models spaced across the build plate, like so:
I'm sure you'll all enjoy this. Please let me know how you like it.