E3D nozzle holder logo ~ 5 Revo Connect
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Smart mix of 3 creations of E3D to hold the 5 differents nozzles on an independant stand not fixed to the printer
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 21
- Makes
- 2
- Views
- 334
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
With a printer in a crate, it's hell to catch something attached to the chassis. It is much easier to have a turnstile display that can be placed wherever you want to access our E3D nozzles.
I didn't invent anything, I just made a mix with the creations of E3D in order to have a nozzle display that I can place where I want in my box.
a ten cm piece of 2.5mm diameter metal hanger has been added to allow the turnstile to be hoisted to the desired height.
Depending on the type of filament you will use, and to avoid forcing the fitting of the parts, you will certainly have to file a little to adjust the fitting of the support on the logo. Nothing very complicated.
They appear shiny and smooth here because I steamed them with hot acetone. Be careful with this process it is dangerous, and this surface treatment is absolutely not recommended for novices.
In addition, you absolutely must print the {Revo Connect ~ A modular system for storing Revo nozzles} created by E3D in the link below