Box for Wemos D1 mini/pro
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a second version of my previous Wemos boxes (https://www.thingiverse.com/thing:1995963). I have made files for…
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 160
- Makes
- 1
- Views
- 897
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a second version of my previous Wemos boxes (https://www.thingiverse.com/thing:1995963).
I have made files for "Wemos D1 mini" and "Wemos D1 mini pro".
I also made two lids, one closed and one with an opening for the Wemos OLED 0.96" shield in separate files from the boxes.
There are versions with a cable port with 4mm diameter, and also a long version where a wemos prototype shield can fit besides the Wemos.
The USB port is now rounded. The lid can be held in place by a rubber-band between the mounts and over the lib.
Print Settings
Printer:
A8
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.40
Filament:
https://addnorth.com/sv/shop?material_name=PETG PETG
Notes:
I use PETG with 245 degrees and BuildTAK bed at 60 degrees.
Wemos board placement
The "Wemos D1 mini" board with a metal lid is mounted with the lid upwards and the USB connector downwards.
The "Wemos D1 mini pro" board with a antenna connector is mounted with the antenna connector and the USB connector upwards..Category: Electronics