Prusa Bear PSU Replacement Brace
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement brace required after the removal of the power supply unit (PSU) of a Prusa i3 Mk3S Bear Upgrade
- Rating
- 4.667 / 5
- Likes
- 25
- Downloads
- 93
- Makes
- 3
- Views
- 1,029
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
After placing my Prusa i3 Mk3S Bear Upgrade in an enclosure I realised it would be better to remove the power supply unit (PSU) and place it outside the enclosure to improve cooling.
I searched for a replacement brace but the Bear Upgrade uses a 2040 extrusion for the z-axis frame and I couldn't find one that was suitable so I decided to create one from scratch. This one is a 200 x 100 mm 90 degree brace with a thickness of 20 mm in order to match one half of the 20 x 40 mm extrusion. It could be used for other applications as well.
For the Bear 2040 extrusions you will require three M5 x 10 mm bolts and three drop in M5 tee-nuts. I used M5 hexagon flat head screws that I had left over from the Bear upgrade.
For the print I used three perimeter layers and set the top and bottom to six layers for a little extra strength.
I printed with PETG because it is slightly stronger and able to operate in a warmer environment. I have also included a file for PLA if that's what you would prefer.