Hitman Silverballer Grip Medallions
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Everyone building a clone needs the medallions. I made the medallions to fit my Pachmayr American Legend Grips.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 109
- Makes
- 1
- Views
- 1,019
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial
Took me awhile to finally get the ‘umph’ to make these. Hopefully these help others put the final touches on their silverballer replicas.
These fit into my American Legend (Pachmayr) grips perfectly. I originally designed to have the stock screws hold them in, but the walls on my print were not strong enough to support being fastened.
SO 2 versions here,
- 1 with a hole for the stock screw (Screw Shaft)
- The other version with the post filled (Solid Shaft) *Glue down.
I did a test print after design, in white. It printed well enough with PLA at 0.12mm height with a 0.4 Nozzle.
I did slow this down (30mm/s) and used tree supports + top layer ironing.
I do plan to grab some silver filament, possibly test with PETG, and fill the low area with black paint.
All you agent 47 fans out there, enjoy!