1 / 1
Serpent X20 Airtube v4.5
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The latest revision of the airtube to mount a 40mm fan on a Serpent X20.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 68
- Makes
- 0
- Views
- 702
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
The latest revision of the airtube to mount a 40mm fan on a Serpent X20. It creates a 2mm gap around the motor, creating a air flux and allowing to pass the ESC cable above the motor and getting it back just beside the receiver.
Print instructions
Don't use PLA on that, you will have severe deformations above 60°C...