Lindby Light Switch Remote Holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.77 – €5.82 net (excluding VAT)
For file: SchalterHalter_0.1mm_PETG_MINI_6h17m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.30 excluding VAT (range midpoint).
- Weight reported by the author
- 49 g
- Print time reported by the author
- 6.28 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
An easy way to always have your light remote where you need it.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 90
- Makes
- 1
- Views
- 538
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
I really like my livingroom LED panel with adjustable light color from Lindby. But using the regular lightswitch always turns on the coldest color possible and I have to change it back using the remote. I could turn the lights on and off with the remote as well, but that is not possible when the remote lies on the table in a pitch black room…
Finally with this light switch and wall mounted remote holder I have the remote ready when entering the room - no more cold light!
I designed the holder so it would look like the normal light switch that was installed before, I could even use the same installation material. To make it work for your light switch you might need to change the model a bit.
I printed mine with the Prusa Mini in Prusament PETG - Signal White with supports on and a layer height of 0.1 because I wanted quite the smooth finish. You woudn't notice that anything changed for the lightswitch unless you look really closely.
Let me know if you need any help adjusting my design to your lightswitch! And of course: please share a make if you like the design!