Pixel Product Charging Station
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A way to charge all the Pixel products, phone, watch, earbuds. You know since Google wont make one.
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 121
- Makes
- 2
- Views
- 3,147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
A way to charge all your Google devices in one space. This needs a pair of Yootech wireless charging pads plus the pixel watch charger. Prints in 3 pieces which have the wires run through them before sliding together with friction fit. There is a 4th piece which is optional that can cover the cable channel in the bottom of the base if you want a cleaner look.
The tolerances on these parts need to be how they are for friction fit. Please print with a 0.4mm nozzle at 0.2mm layer height. If you print at different settings I can't promise they will fit together properly.
Assembly:
- Insert the watch charger into the smallest part and thread the cable down the channel.
- Insert Qi pad 1 into the next smallest part and route the cable
- slide the watch charger into the phone charger being careful of the cables
- thread the 2 cables through the hole in the base and out the cable channel
- press fit the assembled phone/watch unit into the base.
- press the 2nd Qi pad into the slot in the rear and plug the cable in. Depending on your tolerances you might want to remove 1 or both of the rubber rings on this pad.
- bundle the cables together
- Optional Slide the cable channel cover over the slot on the bottom
Unfortunately since these are separate chargers you will still need to plug them in individually. I use something like this one my nightstand.