Racing Spaceship
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small racing spaceship that prints easily with no supports. Designed for LM Show print drive.
- Rating
- 5 / 5
- Likes
- 94
- Downloads
- 414
- Makes
- 24
- Views
- 1,685
- Reviews
- 18
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A small racing spaceship that prints easily with no supports with a 0.4 or 0.6 nozzle. This model is very sturdy and doesn't have any sharp edges, making it is a "safer" 3D printed toy. I designed this for the LM Show Christmas Toy Drive, please use lower print instructions when making for the toy drive. Otherwise this ship should print great with your favorite slicer settings.
At 100% scale and on the buildplate this ship is 98mm long (Z axis) 96mm wingspan (X axis) 34mm tall (Y axis)
This model should scale down to 20% and still be printable. The smallest one in my above picture is at 15% scale(0.4 noz, 0.16 layers, 0.3 wall thickness).
LM Show Print Drive Instructions:
Scale: 100%
Layer Height: 0.2 - 0.24
Perimeters: 3
Top Layers: 4 or 5
Bottom Layers: 4
Infill: 15% (Rectilinear or Zig Zag)
Supports: No
If using silk filament please double your perimeters and use 25% infill!