Transparent Float Bowl
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Temporary, transparent float bowl that allows you to see inside your carburetor
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 0
- Views
- 698
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary
This is a see-through float bowl for measuring the fuel service levels on Mikuni BS34 carburetors. It may fit other carbs. If printed with a translucent or transparent filament, it allows you to see the actual fuel level inside the carb. This version is attached with screws. It will not work on a running engine and it would be dangerous to attempt this.
Details:
My first designs leaked a bit. If yours leaks you can try sealing the inside with Polycrylic water based floor finish by Minwax. Polycrylic worked for me. Or use a two-part clear epoxy or any other kind of sealer.
Please note: This design uses screws to attach the float bowl to the carbs so you will need to purchase longer screws. See attached photo for screw specs.
Check my other design that does not use any screws. It is a thin-wall design that has better optical clarity but needs to be held in place by other means.
You can learn more here:
https://www.youtube.com/watch?v=ELfIl_XMGPc
You can see it in action here:
https://www.youtube.com/watch?v=p-krZYz0INA
You can see my bolt on, transparent float bowl here:
https://www.printables.com/model/312692-transparent-float-bowl