c920 Camera Left Side Mount with Camera Below
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bracket to mount the c920 camera on the left front leg of a Prusabox closer to the print bed than the original,
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 152
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I liked the idea of the original mount on the left front side of the Prusabox as it didn't require disassembling the c920 to use. However, I wanted the camera closer to the bed to improve the view of initial layers and also to better enable Obico (pka the Spaghetti Detective) to detect prints going bad.
So I moved the mount portion of the bracket below the screw holes and lengthened it by about 100mm. I also increased the angle of the bracket to improve coverage of the print bed. Finally, I made the hole for the bolt to mount the camera larger for my big fingers.
Printed in PETG with 4mm nozzle, .2mm layer, 15% infill. Print as shown in the sty file. No supports or brim needed.