Radio Tower Simple
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Radio Tower designed for the space-themed 2022 Christmas Community Print Drive.
- Rating
- 5 / 5
- Likes
- 39
- Downloads
- 137
- Makes
- 3
- Views
- 592
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Standard Digital File License
Fun Radio Tower for Outer Space Play!
Original design for the 2022 Christmas Community Print Drive.
Also available: Radio Tower with Dishes Shown in group photo.
Toys for the Print Drive were printed with the filled legs so there would be less chance of them breaking. Both versions are now available.
More Models: Collection of all approved 2022 Christmas Community Print Drive models
Additional Information and Print Settings
Model is approximately 50 x 53 x 150 mm. I printed with 0.2 mm layer height, 3 perimeters, 12% infill, and 4 top and bottom layers (*see note below). No supports. No raft.
| If you are printing for the Community Print Drive, be sure to use the appropriate guidelines: https://print.thelmshow.com/pages/2022-christmas-community-print-drive-guidelines |
Also See my Four Planets
These planets were also designed for the 2022 Christmas Community Print Drive.
More of my designs on Cults3D: https://cults3d.com/en/users/abbymath
Not for commercial use. No derivatives. See license below.
*Note: Depending on the slicer, it may print faster if some regions have bottom and/or top layers removed. If you like playing with slicer settings, here is what I did: Bottom and top layers are removed after height 1 mm. However, this created a tiny gap at the top of the leg arches and the bottom of the side decoration, so I put them back between 35.5 and 44 mm. Top layers included again at 147.5 mm through to the end height.