RatRig V-Core 3.1 XY-joiners gold series with V3D mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
As I liked the Clamping mod of the gold series (2 M5x20 bolts to hold the 2020 extrusion to the part AND metal bottom…)
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 141
- Makes
- 0
- Views
- 1,204
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
As I liked the Clamping mod of the gold series (2 M5x20 bolts to hold the 2020 extrusion to the part AND metal botom plate) and I also liked Adam's (V3D) mod to remove the aluminium spacers and just mount the idlers, I combined both.
Also, I added another 1mm of spacing in the depth of the Right XY-Joiner as I am printing these parts with bad bridging characteristics and my parts did not slide over the extrusion far enough.
Lastly I added a little chamfer here and there to ease mounting the assembly and prevent binding of the plastic part against the frame.
Category: 3D Printer Parts