1 / 2
RatRig V-Core 3.1 XY-joiners gold series with V3D mod — zdjęcie 1
1 / 2

RatRig V-Core 3.1 XY-joiners gold series with V3D mod

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

As I liked the Clamping mod of the gold series (2 M5x20 bolts to hold the 2020 extrusion to the part AND metal bottom…)

Ocena
0 / 5
Polubienia
18
Pobrania
141
Wydruki
0
Wyświetlenia
1204
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

As I liked the Clamping mod of the gold series (2 M5x20 bolts to hold the 2020 extrusion to the part AND metal botom plate) and I also liked Adam's (V3D) mod to remove the aluminium spacers and just mount the idlers, I combined both.

Also, I added another 1mm of spacing in the depth of the Right XY-Joiner as I am printing these parts with bad bridging characteristics and my parts did not slide over the extrusion far enough.

Lastly I added a little chamfer here and there to ease mounting the assembly and prevent binding of the plastic part against the frame.

Category: 3D Printer Parts

Tagi