Andonstar Microscope Base Extension
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€6.30 – €7.70 net (excluding VAT)
For file: Base Extension v1_0.3mm_PLA_MK3S_5h27m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.00 excluding VAT (range midpoint).
- Weight reported by the author
- 120 g
- Print time reported by the author
- 5.45 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Base extension plate for Andonstar microscopes.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 69
- Makes
- 1
- Views
- 1,525
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
The metal base plate on my Andonstar 207 was a little small, so I printed this extension to give me more room. It looks like it might fit other Andonstar models, but don't quote me on it. The fit could be a bit tighter, but it's been good enough for now. The looseness is really only annoying when you pick the microscope up off the table since the printed base extension isn't physically attached. If anyone wants to improve it, let me know and I can share the Fusion 360 model.