1 / 4
Ender 3 V2 + Dragonfly BMS + Orbiter V2 + 5015 Radial fans — image 1
1 / 4

Ender 3 V2 + Dragonfly BMS + Orbiter V2 + 5015 Radial fans

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A printing head for Ender 3/Ender 3 V2 with very good cooling performance.

Rating
0 / 5
Likes
27
Downloads
102
Makes
0
Views
1,816
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

A printing head for Ender 3/Ender 3 V2 with very good cooling performance.

Printing accessories:
Dragonfly BMS hotend
Orbiter V2 Extruder
5015 24V X2 (part cooling)
4010 12V (hotend)

Hardware:
M4x20 @4  (5015 fan mounting)
M4x10@2 (blower cover mounting)
M3x15@6 (extruder/hotend fan mounting)
M3x25 @2 (Hotend moutning)

I recommend printing the base at a 45 degree angle to avoid some cracking with one screw that is close to the edge of the part.
If you want to have the cleanest wire routing, you should include a connector for each 5015 fan, or do your final soldering after they are assembled to the cooling cover.

 

Update 11/13/22
Added a model without the BLTouch mounting flange so that you can fit a 4020 cooling fan for the hotend.

Update 1/15/23 (Adjustable)
-Made the shroud bigger so you can fit a 4020 fan AND BLTouch.
-Made the shroud adjustable +/-2.5mm so you can adjust for other hotends/ bed probes
-Added a slot to the part so can assemble the dual 5015 fans with the Y harness connected

Tags