1 / 5
1 & 2 Spool wall mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple solution to hang spools to a wall or closet
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 135
- Makes
- 5
- Views
- 553
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wasn't quite happy with the existing options, so I designed my own spool mounts.
The single holder is pretty straight forward:
- 3 Wall layers
- Infill 20% (Gyroid or cubic)
For the double spool mount there are added internal supports in the form of intentional internal walls to force the slicer the generate solid walls all the way down to the bottom layers for increased strength.
Print settings: If you're using Cura, just open the 3mf file as Cura project. All values are already set there for PLA
Important: Support settings
- Gyroid (or cubic) pattern
- 20+% support infill
- 0 Z, X&Y distance
- 0 Support Stair Step Height
- 0 Support Join Distance
- No support interface
Wall line count: I'm using 4 but 3 might also be sufficient