1 / 4
wolfcraft FKS 115 slide plate for Dewal DC390
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a slide plate I made for my Dewal DC390 to be used on my wolfcraft FKS 115 guide rail.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 37
- Makes
- 0
- Views
- 587
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This was done to have a very tight fit with my saw. So if you decide to print this remember that not all printers have the same tolerances nor all saws are made the same, so some sanding may be required.
My saw have a clockwise rotation. If your saw rotates counterclockwise you have to mirror the slide plate.
All parts were printed on PETG with 0.28 layer height.
Supports are not required.