Counting matching models…
Bosch FSN / Mafell rail guide adapter for Wolfcraft mini clamp Adapter to mount the Wolfcraft mini clamps (part nr 3455100) to Bosch FSN or Mefell rail guides. Cause not all 3D-Printers are perfectly calibrate I've attached the FreeCAD…
These clamps are attachable on Wolfcraft clamps, just remove the green plastics and pull on the printed clamp parts. Works great and helps a lot, when screwing boards in an 90 degree angle. Printable without supports. Use more than 20 %…
I printed the stand and the clamp height in PETG and the cap in TPU. The clamp I used was this one: https://www.aliexpress.com/item/1005004273070234.html?spm=a2g0o.order_list.0.0.7055180233096a
For best performance the Benchdog has to fit closely. Due to different accuracies/ tolerances of every printer and perforated grid plate, I recomend you first print the "tolerance test". It is steped in 0.1 mm incremets from 19.7 to 20.2…
Wandhalter für zwei Anschlagwinkel von Wolfcraft.
Jednoduchý držák pro svěrky Wolfcraft (nejen) na systém French Cleat. Držák je připraven na šrouby M5 x 17 (já jsem měl větší tak jsem je seřízl) s maticí M5. Tisknuté na PETG vrstvou 0,3 mm. Tištěné s límcem 5 mm (přesto se mi držák…
Nice wolfcraft clamp holder with two bars :-) You need 2xKlemmzange.stl, 4xBacke.stl und 4.Griff.stl for each holder - see pictures. The holder is designed for rods/tubes with a diameter of 15mm. For thinner/thicker tubes please scale…
Adapter für Mini-Einhandklemmen Wolfcraft (passt auch für Duro) zur Befestigung in T-Nut-/C-Profilschienen. Ich benutze sie zur Befestigung von Werkstücken auf meinem Bohrtisch.
Two pieces that turn Wolfcraft one-hand clamps into vertical work table clamps for all work tables with 20mm bore holes. So it is not just limited to the Wolfcraft Master 650 table shown in the pictures, nor to specific table thickness.…
This is a slide-on extension for the Wolfcraft mini clamps (3455100) to compliment the Bosch Mafell guide rail clamp mod for those clamps found here: Bosch FSN and Mafell guide rail adapter for Wolfcraft mini clamp 3455100 von teslapunk…
This is only the clamping part of my One-Hand Clamp Mod which allows the use of Bessey EZM and Wolfcraft Pro M directly on your perforated grid plate Workbench. This version works without an endstop and therefor doesn't need any Screws.…
Remix des Wandhalters https://www.thingiverse.com/thing:4123401 Ich habe die Länge des Halter verlängert. Vielen Dank an den Ersteller des Originals. Der Connector sitzt sehr gut auf dem Halter.
I made quite huge corner clamps for my workshop, so I may share it. I printed with no top no bottom layer to check if it gets damage over time, since it's the first time I designed those. Recommended: PETG 3 or 4 perimeters (4 on picture)…
Držák pro dva úhleníky Wolfcraft k zavěšení na děrovanou stěnu Mars Svratka. Tištěné na výšku s podpěrami pro zadní úchytky na filament Prusament PETG Ultramarine Blue.
Replacement jaw for my wolfcraft microfix mini spring clamp. Recommand to print with 0.2 nozzle. Would be better resolution with all details. On the picture is printed with 0.4 nozzle and is not so pretty. Print Settings Printer Brand:…
Eine FrenchCleat Halterung für den Gehrunswinkel von Wolfcraft. Im unteren Bereich auf der Rückseite habe ich einen Steg eingebaut, damit der Halter nicht zu leicht ausgehoben wird, wenn der Gehrungswinkel entnommen wird. Vermutlich passt…
Aucune difficulté particulière : Fil ABS (pour la résistance) , pas de radeau et support. Infiltrations : 0,2
Material PETG Sterngriff M6 * 10 Unterlegscheibe 6,4 * 20
What is this? A quick replacement pad for the Wolfcraft Microfix clamps. The first thing I did when I got my clamps was break out the callipers and model the pads tips, the originals are a hard plastic, I have printing a few replacements…
Corner Brakets for WolfCraft Pro Medium Clamps
I designed the side stop in Fusion 360 using shape and size of original part Printed one in Recycled PLA for prototype/test. I used 0.20mm layer height, 4 perimeters for extra strength and supports for knob location. I used “Paint-on…
This is a part allowing to connect two one-hand type Wolfcraft clamp together to extend their reachibility. It is composed of : One connector Two thumb screws “cap” You will need in addition : 2 M6x30 (or longer) hexagonal head screws 2…
This is the 2 Piece version of my One-Hand Clamp Mod which allows the use of Bessey EZM or Wolfcraft Pro M directly on your perforated grid plate Workbench. The “fixed” jaw slides on the clamps rail and allows the rail to be pushed into /…
This is a quick and small jig to help you re-align the WOlfcraft 4650 ruler doweling jig to previous drilled holes, in case the shelf you're working on is longer than the ruler itself Just clip one or two of these blocks into the first…
Wandhalter für den Gehrungswinkel von Wolfcraft.
Supports muraux pour 2 serres-joint WOLFCRAFT PRO L 3030 - Valide pour toute la famille de longueur
The original cap provided with the Wolfcraft 4195 precision knife frequently fell off, which inspired me to create a more secure replacement. This process eventually led to the design of a new grip that firmly secures the cap and offers a…
Supports muraux pour 2 serres-joint WOLFCRAFT PRO M3456 - Valide pour toute la famille de longueur
his is an adapter to use the wolfcraft4650 doweling jig together with a makitaRT0700 /DRT50 router. So you can use the router to create any holes in the 32mm system. It has a perfect fit to the plunge base 195563-0 and is fixed with the…
I used the linkt clamps as inspiration and designed them to fit at the small clamps. The parametric files are available at the following link.…
Various upgrades for Wolfcraft dowelling jigs and cheap clones Thumb screw Let's you (un)tighten the depth plate/fence without any tool Print two of these and use M6 bolts in place of the provided flat-head ones Depth plate Flat depth…
The Wolfcraft Master Work 1600 MFT Working Table is a competitively priced and well built MFT style work bench that has many pluses but one big minus in that it does not have a T Track slot like many other MFT work tables on the front and…
Remixed using https://www.thingiverse.com/thing:3800185 https://www.thingiverse.com/thing:1520678
This is a replacement jaw for the Wolfcraft Spring Clamp FZ40 and FZ60. To install the jaw just remove the black pin by pressing it out with a small screw driver. The print needs no support. I printed it with 0.15mm layer height and a…
Aufnahme für Makita Handfräsen vom Typ RT0700 auf die alten Wolfcraft Bohständer. Kann mit der original Schraube befestigt und im Raster gedreht werden.
I got annoyed with finding the right scraps to support the guide rail ends for the clamps for making my cuts. So I designed this simple guide rail lift for the Wolfcraft Master Work 1600 (to be fitted on the long table side, the one with…
The Wolfcraft miniature one-hand clamp ( EHZ-Miniature-One-Hand-Clamps ) is hollow under the soft rubber (teal) jaws. When clamping something smaller than the jaw itself, there is a good chance that the thing you want to clamp falls…
Bench dogs for all work tables with 20mm bore holes such as Wolfcraft MASTER tables. Two pieces, the clamp can be used on its own to fix things on the work table. Optionally you may insert the tip into the clamp, that way you can use it…
Die Anschläge der Wolfcraft Dübelleiste lassen sich nur in Schritten von 2 mm verstellen (das wird bei den Angaben leider verschwiegen). Diese Abstandsadapter lassen Zwischenschritte von 0,5 mm - 1mm - 1,5 mm zu. Einfach auf die Winkel…
Clamping range extender for wolfcraft master workbench. Clip-on for the original accesories. Designed for easily extend your clamp range with an extra insert. Printer: Ender 3V2 Material: ABS Resolution: 0.2 wall: 2 infill: 50% supports: No
A spare part for Wolfcraft Workbench (wolfcraft MASTER 200 Clamping and Working Table I 6177000)
Solid clamp holder for Wolfcraft Clamps. The standard version can hold up to 4 Wolfcraft Pro with an outreach of 65 mm. The XL version can hold up to 2 Wolfcraft Pro with an outreach of 90mm.
This clever adapter lets you combine 2 one-hand clamps
I had spot holes to make in my bathroom and I needed a dust collector.
Simple addon for Wolfcraft FZ40 Spring Clamp to convert it into Edge Banding Clamp. Printing is done in PETG with 0.20mm height and 0.6mm nozzle. Beside 3D printed parts 4 M3x10 screws are needed and 4 M3 bolts. Also you need rubber strap…
Keeps doweling jig (2 parts) and two sets of drill bits with stop collars (6mm, 8mm, 10mm) and allen wrenches. Filament: Nebula PETG Transparent
Adapter to connect the Wolfcraft Mini Clamps to the Bosch FSN Rail Guide - optimized to be printed in an upright orientation to give it more stability in the direction of the tensile force coming from the clamp. Version 2: I was alway…
Einfacher Halter für die Wolfcraft Mini Einhandzwingen für die Wandmontage oder für die French Cleat Leiste. Es sind Leisten in 14,5mm und 17,5mm beigefügt Es werden dann zwei M4x20 Senkkopfschrauben und zwei M4 Muttern benötigt.
Spojeni dvou sverek a prodlouzeni jejich delky profil sverky 20x6 mm ,prumer sroubu 6mm delka 30mm. Material Petg vypln vyzkousena 80%.
A collection of different wall mounts, will increase it over time.
So I have two of these Wolfcraft clamps and a while ago one had a broken spring. It didn't work anymore which is why I came up with this repair kit. The kit consists of the two printed parts as well as three parts you need from the…
This is an adapter to use normal Wolfcraft Pro L one-hand clamps for laying wood or WPC decking. Dies ist ein Adapter für normale Wolfcraft "Pro L" Einhand-Spannzwingen, um diese bei der Verlegung von Holz- oder WPC Decks einzusetzen. Am…
Utiliser sur table de sciage Wolfcraft Mastercut 1500 mais compatible avec toute table dont l'écartement entre plot est de 140mm. Il faut utiliser des vis à tête hexagonale M5 de 18mm (22mm avec la tête). Le système est composer d'un…
Das ist eine Adapterhülse für den Einhandzwingenverbinder von wolfcraft, damit lassen sich auch die Einhandzwingen 3456 und 3457 verbinden
I printed two of these to hold my Wolfcraft Square 5205 - Universal Angle & Try Square On my design the square hangs on the vertical. I'm using M3 screws with flat head The holes on the outside are bigger to fit bit holder for the…
Wolfcraft Snap-Off Blade Knife 18 mm, no. 4138000 I made this model to create a Gridfinity bin for myself. Everyone's Gridfinity is different, so instead of a particular bin, I'm sharing the model itself. Use this as a tool body to…
Mit dieser Schutzkappe für die Wolfcraft 2164 Mehrkranzlochsäge kannst du das Werkzeug problemlos in deinem Werkzeugkoffer lagern. Die Kappe schützt andere Materialien und dich selbst vor Verletzungen beim Verstauen. Die Schutzkappe…
Easy to print bin for the gridfinity system. It stores the Wolfcraft undercover jig.
Modified brackets for Wolfcraft 4650 doweling jig. I did not like fiddely setting depth on original brackets, so I made set with fixed position for 18mm wood thickness. I also added slot for clamps (Wisent in my case), so clamps can stay…
Table saw fence locking mechanism for Wolfcraft Mastercut 1500. ABS is preferrable over PLA. Category: DIY
Wall bracket for the Wolfcraft internal dimension adapter for folding rules EAN: 4006885522305 This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/bCtQH1FdYzY I printed them on an AnkerMake M5 in 22 minutes…
This is a remix of the Gridfinity Wolfcraft Pocket Hole Jig where i added magnet holes
This was done to have a very tight fit with my saw. So if you decide to print this remember that not all printers have the same tolerances nor all saws are made the same, so some sanding may be required. My saw have a clockwise rotation.…
Keyhole Pegboard holder for my wolfcraft silicone gun. The Pegboard-spacing is 45mm. Prints without supports.
Die Spannbacke passt auf beiden Seiten. Das verwendete Material ist TPU Flex Medium . Schichthöhe: 0,2 mm Perimeter: 4 Konturhüllen oben: 4 Boden: 4 Stützen: keine Fülldichte: 20% Füllmuster: Gyroid
Die Spannbacke passt auf beiden Seiten. Das verwendete Material ist TPU Flex Medium . Schichthöhe: 0,2 mm Perimeter: 4 Konturhüllen oben: 4 Boden: 4 Stützen: keine Fülldichte: 20% Füllmuster: Gyroid
I have uploaded two versions of this, because I noticed that it still has quite the clearance between the board and the Wolfcraft. Because of this I created version 2, which I didn't test jet. Recommend maybe glueing the hook and the…
I was making a shelf that needed dowels in the end of a 16 mm MDF panel board. But the drilling guide from Wolfcraft that i had, had a triangle end that made it impossible to center the tool, so I made an insert the fir inside the guide.…
This is a remix of the clamp storage adapted for Ikea Skadis system.
The model on this platform is discontinued. Head over to MakerWorld to have fully customizable version directly in your browser: https://makerworld.com/en/models/861353-wolfcraft-drill-holder-french-cleat-frenchfinity
This is my quick and dirty try at solving my two main issues with default pins - they are usually too high and I need four of them to securely mount rectangular item (sanding….). They are 10mm tall, but 5mm tall at the sharp edges and…
Gridfinity Holder for Wolfcraft Drill Chuck (Hex-Bohrfutter) 1x1x6 Modell 2625000
Description This tool was born out of pure necessity! While renovating my bathroom, I needed a small tool that I can hold with two finger to smooth out the silicone caulk bead. I had the repair kit from Wolfcraft, but the handle was too…
Fence for centering the Wolfcraft undercover jig on a 48 mm slat. The base of the jig is 60mm wide so the fence currently reaches 6 mm inwards. Fusion 360 included for easy remixing.
It is a fastening knob for wolfcraft dowelling jig part number 4650000. One of mine broken, then model and replace with printed one. Print Settings Printer Brand: Prusa Printer: MINI Rafts: No Supports: No Resolution: 0.15 mm Infill: 90%…
Case for easy access to your wolfcraft mini 30 spring clamps . Has space for up to 16 clamps. Step file for base clamp container is included for ease of remixing. Note for small printers : The side panels are designed to be easy to…
To attach holder to HSW use insert-with-M3.stl part from original Honeycomb storage wall and screw together with M3 bolt. Part 2 screw together with insert and then is part 1 and 2 glued together.
The endstop for my drill press was broken, so I made a replacement. There is space for an M8 nut to be inserted from the inside. The whole shebang is then clamped to the drill press via a M8 bolt. Print instructions I printed this with 5…
Przy użyciu wyżynarki ostrze się kołysało. Przy użyciu stabilizatora i zamontowanym długim ostrzu można śmiało ciąć :) Do wyżynarki Boscha i ostrza Makita A-86315. Trzeba przesunąć mocowanie włącznika stołu. części można wydrukować na…
Welcome to the world of DIY organization! Tired of searching for your trusty stubby screwdriver whenever you need it most? Fear not, for we have a fantastic solution for you: the 3D printable screwdriver holder, designed specifically to…
Filament cutter arm for wolfcraft 4196 blade
This is a holder for Wolfcraft square units. There is a model for one square, another one for two of them and last one
Pour raccorder un embout d'aspiration Festool au gabarit de perçage Wolfcraft 4686 https://www.wolfcraft.com/products/wolfcraft/fr/EUR/Bestellvarianten/Bestellvariante-extern/Guide-de-perçage-mobile/p/P_4686 Inclut les ergots de blocage…
Gridfinity 5x3 Holder, designed to perfectly accommodate your Wolfcraft circle cutter. Contains magnet holes and can be stacked.
I use my gun with liquid nails in my small cabinet shop a lot and needed a practical holder. Added a small drip tray on bottom with small storage for caulkblockers as well. I designed this holder to use it on side of my mobile toolcart.…
Ersatz Griff/Anschalg für Wolfcraft winkel
Wolfcraft mini clamps (part nr 3455100); Einhell Guide Rail 2x 1000 mm (Item no: 4502118)
For 135 mm saw disk (Bosch PKS 40). Clue with dichloroethane. M4 screw to connect with saw knife. Category: DIY
Box for Wolfcraft countersinks that protects them and acts as a display stand. Also very satisfying fidget toy. Print-in-Place verison The lid is kept shut indirectly by magnets. Countersinks can be displayed at 90° and 45° for easy…
There is an angle grinder attachment from Wolfcraft, allowing you to use your angle grinder as a simple biscuit jointer. The square was missing so I designed one. An der Multi-Holzfräse für Winkelschleifer von Wolfcraft fehlte der…
A simple mockup for the wolfcraft 489 000 hook blade. I've created it to test my Sustainable Safe (Balloon) Cutter Knife .
This is a angle "stop hold" for wood jointer from Wolfcraft.
repuesto de la pieza plastica que lleva la escuadra universal wolfcraft 5205 replacement part for the universal Angle & Try Square wolfcraft 5205 plastic piece.
This compact wall mount is designed for the Wolfcraft Undercover Jig. All parts can be inserted easily and removed just as quickly. The main advantage is the significant space saving: instead of using the bulky original case, all…
Of course the part is almost impossible to find or at a high price. At first I thought I would do the complete guide in two separated parts because it was too big for my printer. Then I figured why not just make a piece that fits in the…
This is a remix of Držák úhelníku Wolfcraft pro děrovanou stěnu Mars . 🔧 Modifications made: 🌀 Rounded edges – for a cleaner and more comfortable design without sharp corners 🪛 Added two extra mounting holes – allowing the holder to be…
I printed it standing with tree supports and a raft but it's not very rigid like that. Would rather print on its side if I wer to again. FreeCAD files in my GitHub repo .
Created this French Cleat wall holder for the Wolfcraft 280 x 500 mm Universal Angle & Try Square (Universalwinkel 5206 000). The holder has a hole to fix it to the French Cleat profile with a screw but I am experimenting with that…
