Print-in-Place Box and Stand for Wolfcraft Countersink
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.08 – €2.54 net (excluding VAT)
For file: Senkerhalter zusammenbau pip_0.4n_0.2mm_PETG_MINIIS_2h5m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.31 excluding VAT (range midpoint).
- Weight reported by the author
- 36 g
- Print time reported by the author
- 2.09 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Self closing box and display for three Wolfcraft Countersink with Hexagonal Shank. Optional magnetic wall mounting.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 20
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Box for Wolfcraft countersinks that protects them and acts as a display stand. Also very satisfying fidget toy. Print-in-Place verison
The lid is kept shut indirectly by magnets. Countersinks can be displayed at 90° and 45° for easy access.
Optional magnets in the back allow for mounting on vertical magentix surfaces
Size: 52 x 52 x 19 mm
designed to fit Wolfcraft countersink
2546000
2547000
2548000
If you want to use it for similar ¼'' Bits, dimensions of the biggest fitting countersink are pictured. The tip of the countersink holds the lid closed, so lenght has to be close to 35mm. Diameter should not exceed 13mm.
Printsettings:
print on top surface
4 perimeters
no supports
Hardware:
2x magnet D5 x 2
2x magnet D5 x 5
Superglue
(Optional)
2x magnet D12 x 2
Assambly:
- Remove Support
- Glue 2 Magnets D5x5 into side of countersink holder
- Turn countersink holder so magnets face bottom.
- Reverse Box
- Glue 2 Magnets D5x2 into small holes on bottom such they are attracted to the Magnets in countersink holder
- (Optional) Glue 2 Magnets D12x2 into big holes on bottom
Notes:
.step-files are provided in case you want to adapt to other Bits. If you do, feel free to add a remix.