Counting matching models…
Gridfinity storage for spare drill and countersink bits to got with the Katz-Moses Countersink Bit. Storage for the main model here: https://www.printables.com/model/1598755-katz-moses-countersink-bit-holder-gridfinity Version 2 July 19,…
I couldn't find an existing Gridfinity holder for the Harbor Freight 5 Piece Warrior Center Drill Countersink Set (60381 or 42280), so I made one. I first had to learn how to space items of varying size with even spacing between them…
Some simple storage racks I made to keep loose countersinks, spot drills small end mills etc from rolling around in drawers getting dull and Reduce time I spend digging around looking for a specific angle or size
The Corsair 4000D AR case I bought came with M3x0.5mm x 4mm screws with chamfered heads. (The case's manual says they 5mm length, but...) These are rather loose in the holes of the drive mounting plates. These washers help fix that. Only…
Gridfinity bin for the Amana Countersink bit model 55227. This is an updated and improved model that also houses the included allen wrench (removable by pushing up through a hole in the bottom). The remixed version is for my original…
This is a 1x3 bin for three countersink bits. The bits are so old I don't remember the brand or where I got them from, sorry. They came in S/M/L sizes. Printed in PETG at 10% infill.
Gridfinity storage for spare drill and countersink bits to got with the Katz-Moses Countersink Bit. Storage for the main model here: https://www.printables.com/model/1598755-katz-moses-countersink-bit-holder-gridfinity Version 2 July 19,…
This is a standard 60mm MIL-STD-1913 Picatinny rail section. It is designed for airsoft use, featuring two mounting holes specifically clearanced for M4 countersink bolts to ensure a flush, snag-free surface for your optics or grips.…
Countersink Replacement Bit Set Uses have grid sized base, works fine with standard 42mm plates but allows offsetting by 1/2.
The set of countersink drills Parkside PSB 6 A1 (like most of Lidl /Parkside tools) is sold without box for storage or transport. That's why I designed this box. The box consists of two parts base(.stl) and lid(.stl) connected by a simple…
Remix of "Ikea lack support leg support bracker" by Tiko, that I recreated from scratch in Fusion360 to be parametric (editable .f3d project included). My idea was to place the Prusa Original Enclosure on an Ikea Lack table, but it…
These stops are designed for a specific set of countersink bits sold on AliExpress. I know these are bits for routers, but it's cheap and works great with drills. https://www.aliexpress.us/item/3256804616582641.html Note: The sizes…
Expansion of my storage system (874931-modular-router-bit-and-bit storage), flat countersink holder
Expansion of the storage system, here a set of holders that supports the SpyroTec countersinks from Gühring.
Simple gauge for the few variants of countersink screw head angles. As always I am including the source files in the Fusion360.
Gridfinity Countersink Bit Holder for 7 countersink bits. Fit bits from 3mm to 6mm in 0.5mm increments. Fits on a 3x4 grid. Multicolor is optional.
Bolt Countersink Angle Gauge 88-92 deg for 8mm bolts
Countersink Angle Gauge 81-84°, 89-92° & 93-96°
I couldn't find an existing Gridfinity holder for the Harbor Freight 5 Piece Warrior Center Drill Countersink Set (60381 or 42280), so I made one. I first had to learn how to space items of varying size with even spacing between them…
It says it on the tin! Also includes space for the small hex wrench. Photo shows it printed in Overture Light Gray PETG
Allows you to use countersunk screws on flat surfaces or on through holes in delicate items such as porcelain. Short one is for flat surfaces and the long one is for through holes or if you want to centre the screw in the hole. The caps…
I remixed as I had a different set of countersinks from China: https://www.aliexpress.com/item/4000050405050.html I found that the hinge is a bit brittle (too tight) and the latch is too. Included Fusion360 source and an STL with some…
Designed to hold a pack of 6 hex shank countersinks (sizes: 6, 8, 9, 12, 16, 19)
ENG I modified this holder for a set of countersink drill bits. You can buy it here I made the hole tolerances so it should fit nice and clean. I also added a hole for the small hex key that comes with the set. The holes are capped at the…
This is a gridfinity organizer bin for a standard set of countersink bits on ¼" hex quick connect driver ends. The raised lettering can be colored with a filament swap at the right layer, or simply painted or sharpied like I did.
Tool for precise drilling of holes and countersinking when drilling 18 mm boards. The drilling guide has the option of a stop when it is 25 mm (1 inch) from the edge. The corner aligner adjusts the boards exactly to the edge. Simplifies…
For 6 countersink drills with diameter 10, 10, 8, 6, 6 and 5 mm. Some support on build plate (See slicer screenshot) is recommended, support everywhere is overkill.
Some simple storage racks I made to keep loose countersinks, spot drills small end mills etc from rolling around in drawers getting dull and Reduce time I spend digging around looking for a specific angle or size
Gridfinity countersink drill bit holder for a 4-piece metric set & allen wrench. If you have an AMS then you can download the 3mf where the text is a separate body and you can change the color of only the main body. if not then you can…
Protective box for Amana Tool AMS-628 6-Pc Carbide Tipped Countersink
Zur sicheren Aufbewahrung von Kegelsenkern. Das Loch in der Mitte dient für zusätzliche Kleinteile. Es gibt einen Standard-Deckel und einen Deckel "M57" mit einer größeren Toleranz. Viel Spass! For safe storage of countersinks. The hole…
Blocks. Easy to print. Scalable depending on what they will be used for. Countersink screw holes. Check out my other models and like them.
I made them in ASA to fasten synthetic roof slates for a garden project. This material resists weathering but is also tough and compliant. So it grips the surface well, spreads the screw force and therefore reduces the likelihood of…
Lidl's countersink bit set came in a single-use plastic packaging. As soon as it opens, rubbish. A little use in Fusion360 to design an insert for a parametric design of a box, already available, solved the problem. Design Used:…
a quick case for a Bosch countersink drill set with 6mm shaft and 8, 10, 12 mm diameters. print with standard profile in any filament.
This is a simple gridfinity organizer for the small 5 piece counter sink set from ENT (European Norm Tools) for wood drills. Metric - ranges from 2,5mm to 4,5mm
This modular holder system stores threading tools, countersinks, step drills, and bit inserts in a clearly organized manner. Each tool type has its designated slot, ensuring quick access and secure placement. The entire unit is compatible…
Print the top a bit smaller otherwise it slips out the bottom part (or create some lock mechanism - when I have time I try to punch holes with hot nail and will see if it helps)
These are designed to fit Shars single flute countersink sets 404-020(6,7,8) 60 deg, 82 deg, 90 deg (1.047, 1.43, 1.57 rad for metric minded :-) ). Most of my models are thin/low profile designed to fit in limited-use shallow drawers -…
Seu escareador quebrou e não segura mais a ponta? Pois aqui esta a solução, basta imprimir esse botão e colocar no lugar do outro q fica novo!!! (Esse reparo so serve para esse modelo que esta na foto). En (ChatGPT): Did your deburring…
Thanks again for @JimmySpeegle_752748 providing the base model. I used a copy of the hole pattern to redraw the Spoilboard and made several variants: M5 Flat Head Counterbore (2.8 mm Depth, 11.2mm Dia.) for the outer Edges M5 Flat Head…
I wanted a simple gridfinity bin for the common sizes (⅜", ½", ¾", and 1") of countersink bits I use often. Prints easily without supports on almost any printer and accepts magnets on the bottom if wanted. Thanks for looking and happy…
It has place for 6 countersink bits with 2x Ø10 mm, 1x Ø8 mm, 2x Ø6 mm, 1x Ø5 mm shafts (20,5 mm, 16,5 mm, 12,4 mm, 10,4 mm, 8,3 mm, 6,3 mm). To be used with heat set inserts and the DIN rail tool holder base (takes M4 x 6 mm inserts and…
Tray to hold a complete set of imperial standard combination drill/countersink cutters, sizes #000 through #8. I needed this when my collection went beyond the common #1-5 sets. The side walls are high enough that you can stack other…
This cable clip can be used with a drywall screw for a flush finish. Drywall screws are common and may hold better than nails in many applications. Customizer options
An open box to store cross-hole countersinks (zero-flute countersinks) from Parkside. The original steel box of these countersinks can be somewhat unwieldy. I wanted something with no lid, so the countersinks are always easy to grab, and…
Sony remote wall mount. The original design looked amazing, but it wasn't suitable for what I needed, I added a packer and some countersinks so that you can screw it into the wall.
Remix from https://www.printables.com/model/1039059-gridfinity-comoware-countersink-drill-bit-storage Made an extra base on https://gridfinity.perplexinglabs.com/ with no magnets, no lid and height 0 u... basically a flat bin. Combined…
This is a Gridfinity tray to hold a microstop cage and a number of countersinks for use with it. Specifically it was designed to hold the #133 microstop sold by Aircraft Tool Supply and the countersinks that are included when you buy it…
l design the inserts for the iNGCO DBCS0031 Countersink Set. The parametric rugged box is remixed from @TheSameNameTwice . The inserts for the countersink bits I have created in Fusion 360 and the parametric rugged box I have remixed in…
TL;DR A box to hold the Ryobi 4 piece countersink set using standard 1.75 filament as a hinge. Why: I needed some countersink bits for sizes I barely use so settled for the Ryobi set. It didn't come with a storage case so modeled this up…
TLDR: A box to keep your Neilsen CT2458 countersink set safely in one place. _____________________________________________________________________________________________ This one'll be short and sweet cos it's just another variation of…
Designed this holder specifically for the Ryobi 4 piece countersink bit set. It includes 4 hex bit holder slots and a 5th small slot for the included allen wrench. It would likely work for any bits that have a standard hex on the back end.
When you're building the Standard Camera , one of the step is to drill holes on the rail and countersink them. I didn't have a drill press to make the perfect countersink, but I do have a 3D printer! This model fits at the end of the rail…
Bit holders for Countersink drill bit set in a Dewalt ToughCase (DWASTCASEBLK). This was made specifically for the countersink drill bits that I have. Mileage may vary with other sets. There are a few slots for 1/2" drive drillbits along…
Gridfinity bin for holding countersink bits with the following sizes: 6.3 8.3 10.4 16.5 20.5 mm. The walls are tall enough so that other bins can be placed on top without hitting the bits. There is also a large cut out to make grabbing…
Custom holder for countersink bits from Princess Auto (Powerfist 6 pc Titanium Countersink Bit Set). Note that this model has multiple bodies so that if you want to do a dual colour for the text (like in my photo above) you can, or just…
A stackable gridfinity 4x3x6 tray with notches and magnet holes, a central platform and modular inserts to store countersinks and other lopsided tools. After printing, insert the platform into the bin, then slide in the modular supports…
The Corsair 4000D AR case I bought came with M3x0.5mm x 4mm screws with chamfered heads. (The case's manual says they 5mm length, but...) These are rather loose in the holes of the drive mounting plates. These washers help fix that. Only…
A gridfinity holder for the Katz-Moses Countersink Drill Bit.
Gridfinity bin for the Amana Countersink bit model 55227. This is an updated and improved model that also houses the included allen wrench (removable by pushing up through a hole in the bottom). The remixed version is for my original…
This is a 1x3 bin for three countersink bits. The bits are so old I don't remember the brand or where I got them from, sorry. They came in S/M/L sizes. Printed in PETG at 10% infill.
Countersink Holder XL – Precision Holders for Countersink Measurements (17 Sizes) The Countersink Holder XL series provides precise, easy‑to‑print holders designed for measuring, organizing and checking countersink diameters. Perfect for…
This is a standard 60mm MIL-STD-1913 Picatinny rail section. It is designed for airsoft use, featuring two mounting holes specifically clearanced for M4 countersink bolts to ensure a flush, snag-free surface for your optics or grips.…
Wanted a way to add my countersink bit to the bit case that I have for my drill. This fits a ½ inch Ryobi countersink bit and is vhb taped inside the bit case. It's a 24 minute print with 2 walls, 10% infill and 0.2mm layer height in pla.
Keeping your tapered countersink bits organized in a stackable, neat looking case. I put some foam in the lid to keep the smaller bits in its place. Printed in white PLA, no supports needed. I designed several inserts for my Tanos…
irwin countersink set 1/4" 3/8" 1/2" 5/8" 3/4" bits There is only a little play from the cap to the bits, so they don't clank around inside. The only bad part is this is to tall to fix in a toolbox.
Lovely file made by jakeprusa, but I found that the drill bit part of the countersink had to be put in first, which seemed to put a little pressure on the guide drill bit. I removed the stacking lip (since the Amana countersink is so big,…
Universal Tool Handle for Countersinks and Other Tools – Ø4 to Ø16 mm A precise and ergonomic tool handle for countersinks and other tools is essential for clean and controlled manual work. Whether countersinking screws, deburring,…
The countersink drill bit is a nice tool but comes without a case, so I designed one. Fusion 360 file is included if you want to adapt. Category: Tools
This is a remix uktricky's Unifi POE 16 Lite rack caddy front panel to use countersink screws for a flush finish.
Countersink Replacement Bit Set Uses have grid sized base, works fine with standard 42mm plates but allows offsetting by 1/2.
Inlcudes holes as: 1x 5.5mm 2x 6.5mm 1x 8.5mm 2x 10.5mm Can screw on the wall if needed (5.5mm holes for securing). PLA 18% infil
I recommend printing with a slight size adjustment; I printed at 100% and it worked, but it was quite cramped.
Printed in .2/.4mm. Turn the lid on the text face.
Designed for the 4 piece HSS set 1/4", 3/8", 1/2", 3/4" found on Temu Simple slide in drawer and cover, easy to print. Walls are very thin in some places but does not impact usability. Category: Tool Holders & Boxes
The holder has a base that is constantly mounted to the peg board and a holder which can be removed together with the bits (see photos). The base itself is mounted by pegs which are printed separately. The pegs are designed with hexagonal…
Case to hold the bits and wrenches included in Amana Tool's AMS-620 Countersink Master Set. As noted, this is a mashup design the incorporates previously release models that needed to be heavily modified to achieve the desired outcome.…
simple angle gauge for typical countersink angles: 60, 82, 90 degrees
I use the following part as an adapter for skadis https://www.thingiverse.com/thing:3413856
This holder is for a set of countersink bits with shaft diameters of 1/4", 3/8", and 1/2". The holder has room for all of the pieces in the set, plus a few extra holes because why not! Some features: - Hole tops are tapered for easy…
Storage for Irwin countersink bits. The feet are 6mm magnets from the local hobby store, which help it stay in place in my metal toolbox drawer. Printed in Hatchbox Black PLA.
Note: Before printing this design, have a look at the remix from @heathen614_26810 here: https://www.printables.com/model/653156-deburr-box I think their design is superior to mine, unless you have a preference for a simple, open holder…
I remixed werd10's cord wrap by changing the holes to fit better with common wood screws Category: Organization
Insert for an Altoids tin to hold a set of countersink bits Print instructions Was a bit tight getting this into the tin, but the filament I'm using is a bit inconsistent. You may need to scale this down in the X/Y directions if you run…
Holder for collection of countersink bits compatible with the popular Gridfinity organization system. I have designed different models for a variety of drill sets: https://www.printables.com/social/175706-aaronoaks/collections/313836 More…
Simple stand for a set of countersink cutters. Easy print. No supports.
Super simple stand for a set of countersinks. Sized to fit the shanks with 6, 8, 10 and 12 MM. Easy print. No supports.
Being unsatisfied with the other options available, I re-created a DDR pad bracket. Over time, I also was able to validate and modify it for use on other machines. I've provided both countersunk and stock variants, depending on which…
