HyperX Replacement Headphone Shell
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement headphone shell for the HyperX KHX-H3CLW speaker pods.
- Rating
- 4 / 5
- Likes
- 12
- Downloads
- 122
- Makes
- 1
- Views
- 1,254
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
Replacement headphone shell for the HyperX KHX-H3CLW speaker pods.
Print Settings
Printer:
Artillery Sidewinder X1
Rafts:
No
Supports:
No
Resolution:
6mm nozzle x 0.32mm
Infill:
25%
Filament:
How I Designed This===================
The new part does not have the ratchetting ability, rather uses friction to hold the metal tongue of the speaker pods from sliding. This was necessary for me as I lost the nylon ratchet spring clip. My melon is big enough that I always have the pods fully extended anyway.
Part hyperX-shell-inner-v2a is the same as hyperX-shell-inner-v2 except the screw hole is plugged by a thin, solid layer to produce a better shoulder for the screw head. Drill out the hole with a 7/64" bit.
If you have lost any of the screws (I had one fly away into oblivion), you can also use an M3 x 8mm or 10mm socket cap screw.
Category: Replacement Parts