HyperX Replacement Headphone Shell
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement headphone shell for the HyperX KHX-H3CLW speaker pods.
- Ocena
- 4 / 5
- Polubienia
- 12
- Pobrania
- 122
- Wydruki
- 1
- Wyświetlenia
- 1254
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Replacement headphone shell for the HyperX KHX-H3CLW speaker pods.
Print Settings
Printer:
Artillery Sidewinder X1
Rafts:
No
Supports:
No
Resolution:
6mm nozzle x 0.32mm
Infill:
25%
Filament:
How I Designed This===================
The new part does not have the ratchetting ability, rather uses friction to hold the metal tongue of the speaker pods from sliding. This was necessary for me as I lost the nylon ratchet spring clip. My melon is big enough that I always have the pods fully extended anyway.
Part hyperX-shell-inner-v2a is the same as hyperX-shell-inner-v2 except the screw hole is plugged by a thin, solid layer to produce a better shoulder for the screw head. Drill out the hole with a 7/64" bit.
If you have lost any of the screws (I had one fly away into oblivion), you can also use an M3 x 8mm or 10mm socket cap screw.
Category: Replacement Parts