1 / 6
🚪 Parametric hinge - horizontally printed - print-in-place
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hinge with any length/width and count of holes - defined by few params.
- Rating
- 5 / 5
- Likes
- 54
- Downloads
- 324
- Makes
- 1
- Views
- 1,003
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — NoDerivatives
Info:
- any width/height
- any number of holes
- hinge is adjusted to extra negative opening angle -105° (which means it opens in total to 105+180 = 285°)
- the plate is 3mm thick
- i needed parametric horizontally printed hinge for my previous model, so here i have separated it with even more possibilities and formulas, that can be useful
Variations:
- exported few most common variations
- see Blender file for other params
Print info:
- increased infill, if you want more durability (50%)
Parametric design:
- connectors_count
- the height of hinge
- number of connectors on the right side of the hinge
- height in cm is always connectors_count-0.5 (so for 5connectors, it will be height 4.5)
- side_width
- width of one side of the hinge in cm
- holes_x
- number of holes in the width direction
- holes_y
- number of holes in the height direction
