PrusaBox-AirExhaust-external
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.20 – €1.46 net (excluding VAT)
For file: PrusaBox_Exhaust_0.2mm_PLA_MK3S_1h18m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.33 excluding VAT (range midpoint).
- Weight reported by the author
- 17 g
- Print time reported by the author
- 1.31 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Just a little exhaust to make sure that no screws or something else will fall in.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 28
- Makes
- 0
- Views
- 245
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
In my case i have not much room behind the printer and most of the air exhaust were to big - so i designed one by myself.
Comes greate with the 80mm-Fan on the inside from the official moddingoptions of the PrusaBox. You can screw them easily together.
https://help.printer-box.com/home/download/#elf_l1_UHJ1c2EtYm94L01vZHMvMDE1X2Fpcl9leGhhdXN0XzgwbW0
Name: “air_exhaust_80mm_fan.STL”
or
Use some M3-Nuts and M3-Screws to attatche it to the PrusaBox.