Micro AT Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a very small AT-style computer case for six-slot ISA motherboards.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 127
- Makes
- 0
- Views
- 1,104
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v3.0
This is a very small AT-style computer case for six-slot ISA motherboards, like the Forcom M396:
https://www.philscomputerlab.com/forcom-m396f.html
https://theretroweb.com/motherboards/s/pcchips-m396f-ver.2.6
I have designed this case to use a TFX power supply, and to use common lighted pushbuttons for the power-on and reset switches, and a common rocker switch for the power cutoff switch. The case supports a single 3.5" external drive bay, and assumes that some sort of flash media storage device, like the XT IDE (https://www.glitchwrks.com/2017/11/23/xt-ide-rev4) will be used for fixed storage.
The case is fastened together with M3 socket-head cap screws, screwed into heat-set fasteners. The three-piece top can be screwed together, and glued, for extra strength.
Print instructions
Layer height isn't particularly important, but print with a density of at least 25%, and gyroid or rectilinear infill.