1 / 3
Ender 3 Pro Spool Holder and Filament Guide for Direct Drive
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Top mount direct drive spool holder and filament guide, uses stock ender 3 spool bracket.
- Rating
- 4.5 / 5
- Likes
- 66
- Downloads
- 699
- Makes
- 6
- Views
- 2,884
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a spool holder/filament guide combo print. This uses the stock ender 3/ender 3 pro spool holder bracket and is meant to turn the spool so that it goes straight down into a direct drive hot end.
Additional Hardware:
- 1 x m5 nut
Printing:
Printed in PLA. Print in the orientation as shown in the CURA image. I designed it so that it can be printed without supports.
Setup:
- Remove the original spool holder, saving the bolts and one of the nuts.
- Slide the print onto the top 20 x 20 extrusion.
- Place one of the original locking nuts for the bolt hole above the aluminum extrusion.
- Use a nut for the other bolt.
- Optionally a section of PTFE tubing can be can and placed into the filament guide for a smoother transition.
Tipping:
If my model was helpful to you, consider tipping me for a drink.