1 / 3
Aufhängungshalter vorne für DT-03 / front suspension holder for DT-03 — image 1
1 / 3

Aufhängungshalter vorne für DT-03 / front suspension holder for DT-03

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

DE:Unterer Aufhängungshalter vorne für das DT-03 Chassis.EN:Front suspension holder for the DT-03 chassis.

Rating
0 / 5
Likes
9
Downloads
57
Makes
0
Views
360
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

DE Beschreibung:

Passend für das Tamiya DT-03 Chassis. Dazu gehören: Neo Fighter Buggy, Racing Fighter Buggy und Aqroshot. Ein Ersatzteil das dem Vorbild nachempfunden ist.

 

EN Description: 

Fitting for the Tamiya DT-03 chassis. These include: Neo Fighter Buggy, Racing Fighter Buggy and Aqroshot. A spare part thats based on the original part.
 

 

Druckeinstellungen/print settings:

 

Düse/Nozzel: 0.4mm/0.6mm, Schichthöhe/layer height: 0.2mm

obere und unterer Schichten/top and bottom layers: 3 layers

Wandlinien/parameters: 0.4mm = 4 Walls 0.6mm = 3 Walls

Füllung/infill: 50%-100%

Stützstruktur/supports: keine/none

Material: PETG, Nylon, PCTG, ASA

 

Hinweis/Note:

Das Bauteil ist teilweise sehr filigran und muss gegebenenfalls noch nachbearbeitet werden. Stelle sicher das dein Drucker gut eingestellt und kalibriert ist

The component is partially very thin and mayby need some post processing. Make sure that your printer is well tuned and calibrated.

Tags