Aufhängungshalter vorne für DT-03 / front suspension holder for DT-03
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DE:Unterer Aufhängungshalter vorne für das DT-03 Chassis.EN:Front suspension holder for the DT-03 chassis.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 360
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
DE Beschreibung:
Passend für das Tamiya DT-03 Chassis. Dazu gehören: Neo Fighter Buggy, Racing Fighter Buggy und Aqroshot. Ein Ersatzteil das dem Vorbild nachempfunden ist.
EN Description:
Fitting for the Tamiya DT-03 chassis. These include: Neo Fighter Buggy, Racing Fighter Buggy and Aqroshot. A spare part thats based on the original part.
Druckeinstellungen/print settings:
Düse/Nozzel: 0.4mm/0.6mm, Schichthöhe/layer height: 0.2mm
obere und unterer Schichten/top and bottom layers: 3 layers
Wandlinien/parameters: 0.4mm = 4 Walls 0.6mm = 3 Walls
Füllung/infill: 50%-100%
Stützstruktur/supports: keine/none
Material: PETG, Nylon, PCTG, ASA
Hinweis/Note:
Das Bauteil ist teilweise sehr filigran und muss gegebenenfalls noch nachbearbeitet werden. Stelle sicher das dein Drucker gut eingestellt und kalibriert ist
The component is partially very thin and mayby need some post processing. Make sure that your printer is well tuned and calibrated.